Click image to view full size image
Description:
led tracking lighting fixtures1, Less heat sink
2, Long lifespan
3, 2 years warranty
4, CE&RoHS&ISO9000
led tracking lighting fixtures SP-8006
LED Spot Light, LED Spot Track Light,solar street light
RoHS | CE | CLASS 2 | 50Hz~60Hz | Protection Class 2 | Recyclable |
1.LED Track Light Material:
Aluminum Alloy Housing
StrengthenGlass
Processed Surface and Spray Painted
2.LED Track Light Standard Specifications:
BeamAngle:30° CoolWhite:5000~6000K 90~260V/AC
3. LED Track Light OptionalParts:
WarmWhite:3000~4000K 12/24V/DC 277V/AC
ledlight|led|led bulb|led lamp|led lighting|lighting|light|lamp|2013new product|led light bulb|led led
4.Application:Tetail store(especially window displays),department stores, gallery, showroom, restaurant,
exhibitions,home
5.LED Track Light Specification Sheet
Item NO. | Input(V/AC) | Power(W) | Luminous Flux(Lm) | Color Temperature(K) | Ra | N.W(Kg) |
SP-8006 | 90-260 | 7 | 630 | 5000-6000 | 75 | 0.8 |
SP-8006 | 90-260 | 14 | 1260 | 5000-6000 | 75 | 0.8 |
Some of our projects in theworld:
Store in Denmark
Sweden
Traditional and Modern LED
There are many advantage of LED. This is an article on what are they and why?
Light Emitting Diode, most commonly known as LED. However, within the industrial, it also has several other names. ‘Solid State Lighting’ and ‘Cold Source Lighting’ are particularly interesting, as it is named after LED’s great properties.
Solid State Lighting
Solid State Lighting as the name suggest, the LED is in a solid state rather than a gas state. This is key reason why LED lighting is better than traditional lighting. As traditional lighting contains gas, many of them are harmful to human and other living things. As a result, traditional lighting is always a potential danger in all areas, during production, usage and disposal.
Production, a lot of hazard gases is concentrate into one production area. These gases will leak out a little no matter what. It can be leak out via air or worse leak out through drainage system. Causing harmful chemical to leak into our water system and our eco system.
Usage, the currently all the manufacturer of traditional lighting uses glass to contain the gas. Therefore, all location using traditional lamps also means there a risk of broken glass as well. Due to production limitation the glass cannot be shutter resistance, further increase the danger. At the same time, should the glass breaks high concentration of chemical will be released. This is especially critical to closed indoor space. Worse case is that the lamp is broken onto an object, where the high concentration of gas will liquefy and contaminate the object as well.
Disposal, this is by far the most important factor. As many countries and region, have not foreseen this. A lot of used lamps are just piled together into a land fill. The chemical within the lamp will slowly but surly leak out into the soil. Which is then pass into sea, this is then affecting the eco system and potentially our drink water system.
Although each traditional lamp only contains a limited amount of chemical, but once it has enter our eco system. The amount will rapidly build up, as there are a lot of lights around the world.
The above is a very important factor why Singbee has moved to LED (see about us for further detail) and our LED follows RoHS (Restriction of Hazardous Substance) standard very strictly. As the importance of a clean and health eco system is too important to be ignored.
At the same time, as the lamp source is solid and it is very strong unlike glass. The lamp source is always impact resistance. From Singbee long years of experience, there are been no lamp physical damage that has caused the LED itself to be unable to functional. So you can say good bye to days where you need to use a potato to unscrew a broken bulb or risk getting yourself cut, if you are using an LED light from Singbee.
Singbee high efficiency factory sell Italian design Cool/Warm White CE/RoHS certified led tracking l
